Kingston Desktop Memory: 16GB(2x 8GB) DDR4 2666MHz CL16 288Pin-DIMM Unbuffered 1.2V HyperX FURY
2 in stock (can be backordered)
- Black colour heatsink
- DDR4 Long-DIMM for Desktop usage
- Support DIMM slot of 1.2V
$109.00
2 in stock (can be backordered)
You also like…
HX426C16FB3K2/16
16GB (8GB 1G x 64-Bit x 2 pcs.) DDR4-2666 CL16 288-Pin DIMM Kit
HyperX HX426C16FB3K2/16 is a kit of two 1G x 64-bit (8GB)
DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 1G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles
(Intel® XMP) 2.0. Total kit capacity is 16GB. Each module has
been tested to run at DDR4-2666 at a low latency timing of 16-18-18
at 1.2V. Additional timing parameters are shown in the
Plug-N-Play (PnP) Timing Parameters section below. The
JEDEC standard electrical and mechanical specifications are
as follows:
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink
FACTORY TIMING PARAMETERS
• Default (Plug N Play): DDR4-2666 CL16-18-18 @1.2V
• XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V
| CL(IDD) | 16 cycles |
| Row Cycle Time (tRCmin) | 45.75ns (min.) |
| Refresh to Active/Refresh Command Time (tRFCmin) | 350ns (min.) |
| Row Active Time (tRASmin) | 29.25ns (min.) |
| UL Rating | 94 V – 0 |
| Operating Temperature | 0°C to 85°C |
| Storage Temperature | -55 °C to +100°C |
*Power will vary depending on the SDRAM.
