,

Kingston Desktop Memory: 4GB DDR4 2400MHz CL17 288Pin-DIMM Non-ECC Unbuffered 1.2V

Availability:

In supplier stock (0-3 days)


  • DDR4 Long-DIMM for Desktop usage
  • Support DIMM slot of 1.2V

$39.00

In supplier stock (0-3 days)

KVR24N17S6/4
4GB 1Rx16 512M x 64-Bit PC4-2400 CL17 288-Pin DIMM

This document describes ValueRAM’s KVR24N17S6/4 is a 512M
x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM),
1Rx16, memory module, based on four 512M x 16-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

SKU: KVR24N17S6/4 Categories: ,
CL(IDD) 17 cycles
Row Cycle Time (tRCmin) 45.75ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 350ns (min.)
Row Active Time (tRASmin) 32ns (min.)
Maximum Operating Power (1.2V) = TBD W*
UL Rating 94 V – 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C

*Power will vary depending on the SDRAM.

Translate »