Kingston KVR26S19S8/8 SO-Dimm SINGLE CHANNEL: 8GB DDR4 2666MHz Non-ECC CL19 1Rx8, 1.2v

Availability:

5 in stock
Add to wishlist
Compare

$62.00

5 in stock

  • KVR26S19S8/8
    8GB 1Rx8 1G x 64-Bit PC4-2666
    CL19 260-Pin SODIMM
    Continued >>
    FEATURES
    This document describes ValueRAM’s KVR26S19S8/8
    is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous
    DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x
    8-bit FBGA components. The SPD is programmed to JEDEC
    standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This
    260-pin DIMM uses gold contact fingers. The electrical and
    mechanical specifications are as follows:
    CL(IDD)
    Row Cycle Time (tRCmin)
    Refresh to Active/Refresh
    Command Time (tRFCmin)
    Row Active Time (tRASmin)
    Maximum Operating Power
    UL Rating
    Operating Temperature
    Storage Temperature
    19 cycles
    45.75ns(min.)
    350ns(min.)
    32ns(min.)
    TBD W*
    94 V – 0
    0o
    C to +85o
    C
    -55o
    C to +100o
    C
    • Power Supply: VDD = 1.2V Typical
    • VDDQ = 1.2V Typical
    • VPP = 2.5V Typical
    • VDDSPD = 2.2V to 3.6V
    • Nominal and dynamic on-die termination (ODT) for
    data, strobe, and mask signals
    • Low-power auto self refresh (LPASR)
    • Data bus inversion (DBI) for data bus
    • On-die VREFDQ generation and calibration
    • Single-rank
    • On-board I2 serial presence-detect (SPD) EEPROM
    • 16 internal banks; 4 groups of 4 banks each
    • Fixed burst chop (BC) of 4 and burst length (BL) of 8
    via the mode register set (MRS)
    • Selectable BC4 or BL8 on-the-fly (OTF)
    • Fly-by topology
    • Terminated control command and address bus
    • PCB: Height 1.18” (30.00mm)
    • RoHS Compliant and Halogen-Free
Category:
Weight 0.1 kg
Dimensions 6 × 3 × 1 cm
Brand

Kingston

Related products

Translate »