,

Kingston Desktop Memory: 8GB DDR3L-1600MHz PC3L-12800 CL11 240Pin Long-DIMM Non-ECC Unbuffered 1.35V / 1.5V

Availability:

In supplier stock (0-3 days)


  • DDR3L Long-DIMM for Desktop usage
  • Support DIMM Socket of 1.35V and 1.5V

$72.00

In supplier stock (0-3 days)

You also like…

KVR16LN11/8
8GB 2Rx8 1G x 64-Bit PC3L-12800CL11 240-Pin DIMM

DESCRIPTION
This document describes ValueRAM’s 1G x 64-bit (8GB)
DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8,
low voltage, memory module, based on sixteen 512M x 8-bit
FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V.
This 240-pin DIMM uses gold contact fingers. The electrical
and mechanical specifications are as follows:

FEATURES
• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

SKU: KVR16LN11/8 Categories: ,
CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power (1.35V) = TBD W*
UL Rating 94 V – 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C

*Power will vary depending on the SDRAM.

Translate »