,

Kingston Desktop Memory: 16GB DDR4 2666MHz CL19 288Pin-DIMM Non-ECC Unbuffered 1.2V

Availability:

2 in stock (can be backordered)


  • DDR4 Long-DIMM for Desktop usage
  • Support DIMM slot of 1.2V

$105.00

2 in stock (can be backordered)

KVR26N19S8/16
16GB 1Rx8 2G x 64-Bit PC4-2666 CL19 288-Pin DIMM

This document describes ValueRAM’s KVR26N19S8/16 is a 2G x
64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

SKU: KVR26N19S8/16 Categories: ,
CL(IDD) 19 cycles
Row Cycle Time (tRCmin) 45.75ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 350ns (min.)
Row Active Time (tRASmin) 32ns (min.)
UL Rating 94 V – 0
Operating Temperature 0°C to 85°C
Storage Temperature -55 °C to +100°C

 

Translate »